Next generation rf remote extender manual

Using an Ethernet switch with built-in PoE eliminates the need for individual PoE Injectors. Crestron also offers Ethernet switches with built-in PoE (models CEN-SW-POE-5 and CEN-SWPOE-16 ), affording a complete high-performance networking solution capable of providing PoE for multiple gateways and other PoE devices.The PWE-4803RU is capable of powering a single gateway, and is available separately or packaged with the gateway as model CEN-RFGW-EX-PWE. Crestron offers the PWE-4803RU PoE Injector, which connects inline with the Ethernet cable, allowing for installation at any convenient location between the gateway and the network switch.PoE (Power over Ethernet) simply requires the presence of an 802.3af or 802.3at PoE power source. The CEN-RFGW-EX gateway communicates with a control system over Ethernet and gets its operating power over the same Ethernet connection using PoE technology. For a more detailed breakdown, please refer to вЂњSupported DevicesвЂќ in the specifications section of this spec sheet. Each ER device that is added to the network negates ten EX devices, with a maximum of ten ER devices allowed.

If no ER devices are acquired, the CEN-RFGW-EX can support up to 100 infiNET EX devices (inclusive of up to six Crestron MLX-3 and/or MTX-3 handheld remotes). Setting up a network of infiNET EX and/or ER devices is simple, utilizing dynamic discovery to locate and acquire each wireless device automatically. The CEN-RFGW-EX can manage both infiNET EX and ER wireless devices simultaneously, eliminating the need for separate gateways, antennas, and LAN connections. For even greater coverage, ER supports roaming amongst up to eight gateways. The typical wireless range for ER devices is 100 to 200 feet indoors, or up to 1000 feet outdoors. The CEN-RFGW-EX continuously monitors each ER device on the network, diligently keeping track when a device goes to sleep, shuts down, or wanders out of range, and restores communications seamlessly when the device reappears on the network. Crestron вЂњERвЂќ operates in the same 2.4 GHZ spectrum as infiNET EX, and is specifically optimized for use with wireless touch screen devices to ensure robust and dependable bidirectional RF communications. Д¬restron Extended Range (ER) wireless technology enables compatibility with certain Crestron wireless touch screens and handheld remotes including the TSR-302, TST-600, TST-602, and TST-902. The wireless range between any two EX devices is typically up to 150 ft (46 m) indoors. Each infiNET EX device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths. Employing a 2.4 GHz mesh network topology, nearly every infiNET EX device on the network acts as an вЂњexpander,вЂќ relaying wireless commands between the gateway and all the other вЂњEXвЂќ devices on the network to ensure that every command reaches its intended destination without disruption.

Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure without the need for physical control wiring.

A single CEN-RFGW-EX gateway enables an entire wireless network of Crestron remotes, keypads, lighting dimmers, motorized shades, thermostats, door locks, and other devices to communicate with a Crestron control system. The CEN-RFGW-EX is a 2-way RF wireless transceiver designed for use with CrestronВ® infiNET EXВ® and вЂњERвЂќ (Extended Range RF) wireless devices.

Next generation rf remote extender manual